NovaStar A5s Plus LED Receiving Card | High-Density LED Module Connectivity for LED Display Modules

In stock
SKU: PLM-PKZQ01-RCV-NW-A5S-Plus-1P
Regular price $25.99
Model
Package Qty

NovaStar A5s Plus LED Receiving Card

The NovaStar A5s Plus is a compact LED display receiving card designed to receive display data from compatible NovaStar sending controllers and distribute signals to LED display modules through a high-density connector and compatible HUB board.
Supporting up to 32 groups of parallel RGB data or 64 groups of serial data, the A5s Plus provides image processing, pixel-level calibration, system monitoring, and backup functions for professional LED display integration. Its compact PCB design and high-density connectivity make it suitable for compatible indoor and outdoor LED display cabinets, rental systems, and replacement applications.

Package Included

Version Package Included
A5s Plus – 1-Pack 1 × NovaStar A5s Plus LED Receiving Card

Product Documentation: A5s Plus Receiving Card Specifications V1.4.1 (PDF)

Product Notice & Compatibility

Model Replacement Notice: The NovaStar A5s has been replaced by the A5s Plus. Before purchasing the A5s Plus as a replacement for an existing A5s receiving card, verify the controller, firmware, HUB board, and LED module configuration requirements.

Important Interface Compatibility Notice: The A5s Plus uses high-density connectors for communication with a compatible HUB board. It does not provide the same direct module connection arrangement as receiving cards equipped with standard HUB75E connectors. Verify the HUB board interface, connector pin definitions, mounting dimensions, and module signal requirements before ordering.

System Compatibility: Supported functions and maximum loading capacity depend on the LED module driver IC, video source bit depth, controller model, and receiving card firmware. For replacement orders or system expansion, please confirm the existing receiving card model and configuration before purchase.

About this item

  • High-Density Module Connectivity: Features high-density board-to-board connectors for connection to compatible LED display HUB boards, supporting up to 32 groups of parallel RGB data or 64 groups of serial data, with serial data expansion subject to the applicable hardware configuration.

  • Driver-Dependent Loading Capacity: Supports up to 512 × 384 pixels at 60Hz with PWM driver ICs and 8-bit video sources. For common driver ICs and 8-bit sources, the maximum loading capacity is 384 × 384 pixels at 60Hz.

  • Advanced Image Processing: Supports Color Management, 18bit+, pixel-level brightness and chroma calibration, independent RGB gamma adjustment, and image rotation in 90-degree increments for compatible LED display systems.

  • Calibration & Display Adjustment: Supports automatic calibration with compatible module flash memory, quick adjustment of dark or bright lines, low latency under applicable conditions, and 3D functionality with compatible control equipment.

  • Backup & System Monitoring: Supports dual-card backup, signal redundancy, temperature and voltage monitoring, network communication quality detection, mapping, preset picture functions, and firmware program readback.

  • Compact Professional Integration: Features a compact 70.0 × 45.0 mm PCB footprint and EMC Class B compliant hardware design. Suitable for compatible LED display cabinets where receiving card dimensions, HUB board connectivity, firmware, and system configuration have been verified.

Lead Time & Freight & Delivery

Lead Time
Ships directly from headquarters. Handling time 2–5 business days.

Freight & Delivery
Shipping fees are not included in product pricing and will be charged separately based on the actual freight cost.

Available shipping methods: Standard Shipping / Express Shipping.

Estimated shipping time: Standard delivery takes 9–18 days, while express delivery takes 5–9 days. All models are shipped directly from our headquarters.

For large projects or bulk orders, please contact us to confirm freight solutions, lead time, and delivery arrangements.

Shipping Terms: The listed shipping methods are provided under DDP (Delivered Duty Paid) terms. If DDP service is unavailable for the destination, alternative terms such as EXW or FOB will be coordinated separately.

Technical Specifications

Parameter A5s Plus
Brand NovaStar
Product Type LED Receiving Card
Model A5s Plus
Module Connection High-density connectors via compatible HUB board
Parallel RGB Data Up to 32 groups
Serial Data Up to 64 groups; expandable to 128 groups with compatible hardware
Ethernet Communication Gigabit Ethernet
Maximum Resolution 512 × 384 @ 60Hz (PWM driver IC, 8-bit source)
Power Input DC 3.8–5.5V
Rated Current 0.6A
Rated Power Consumption 3.0W
HDR Not Supported
18bit+ Supported
22bit+ Not Supported
Color Management Supported
Pixel-Level Calibration Brightness & Chroma
Individual RGB Gamma Adjustment Supported
Low Latency Supported under applicable conditions
Image Rotation 0° / 90° / 180° / 270°
3D Function Supported with compatible 3D control equipment
Quick Adjustment of Dark or Bright Lines Supported
Automatic Calibration Supported with compatible module flash memory
Module Flash Management Supported
Mapping Supported
Preset Picture Supported
Dual-Card Backup Supported with compatible HUB board and system configuration
Signal Redundancy Backup Supported
Firmware Program Readback Supported
Temperature & Voltage Monitoring Supported
Network Communication Monitoring Supported
Operating Temperature –20°C to +70°C
Operating Humidity 10–90% RH, non-condensing
Dimensions 70.0 × 45.0 × 8.3 mm
Net Weight 16.2 g
Certifications RoHS, EMC Class B

Maximum Loading Capacity

Driver IC Type Maximum Resolution @ 60Hz
PWM Driver IC 8-bit: 512 × 384
10/12-bit: 256 × 384
Common Driver IC 8-bit: 384 × 384
10/12-bit: 192 × 384

Important: The listed values are maximum loading capacities under the specified driver IC and video source conditions. Actual loading performance depends on the LED module driver IC, scanning configuration, controller, video source bit depth, and system settings.

Usage & Installation Notes

  • Power Connection: Supply DC 3.8–5.5V through the designated power connection on the compatible HUB board. Verify voltage, polarity, and HUB board wiring before powering on the receiving card.

  • High-Density Connector Installation: Install the A5s Plus onto a compatible HUB board using the designated high-density connectors. Confirm connector alignment, mounting dimensions, and mechanical clearance before securing the receiving card.

  • Ethernet Signal Connection: Connect the receiving card to a compatible NovaStar sending controller through the Ethernet connection provided by the system or HUB board. Verify the receiving card sequence and signal routing before commissioning.

  • Software & Firmware Configuration: Configure the receiving card using compatible NovaStar software and the correct receiving card configuration file. Verify firmware compatibility with the LED module driver IC and existing control system before updating or replacing the card.

  • Calibration & Backup Functions: Automatic calibration requires compatible module flash memory and the appropriate system configuration. Dual-card backup requires compatible HUB board connections and receiving card backup configuration.

  • Handling & Maintenance: Disconnect power before installing or removing the receiving card. Use antistatic protection, avoid moisture and excessive heat, maintain suitable ventilation, and operate within the specified environmental limits.

Application Cases

1. Indoor LED Video Wall Integration

The A5s Plus can be integrated into compatible NovaStar-controlled indoor LED video walls through a high-density connector and matching HUB board. Its image processing and pixel-level calibration functions support modular LED display systems requiring consistent brightness, chroma, and image output.

2. Outdoor LED Display Cabinet Integration

For properly protected outdoor LED display cabinets, the A5s Plus can operate as the receiving card within a compatible NovaStar control system. Its compact PCB design, monitoring functions, and signal redundancy capabilities support professional fixed-installation LED display applications.

3. Rental & Event LED Display Systems

The A5s Plus can be used in compatible rental LED display cabinets for exhibitions, conferences, and event screens. Its mapping, preset picture, calibration, and monitoring functions can assist technicians with cabinet identification, system configuration, and display maintenance.

4. Existing LED Display System Replacement & Expansion

The A5s Plus can support replacement and spare-parts planning for compatible LED display systems, including projects evaluating replacement of the earlier A5s model. Technicians should verify the HUB board, connector pin definitions, firmware, controller compatibility, and LED module configuration before replacement or expansion.