NovaStar A8s Pro LED Receiving Card | High-Density LED Module Connectivity for LED Display Modules
Couldn't load pickup availability
NovaStar A8s Pro LED Receiving Card | High-Density LED Module Connectivity for LED Display Modules
The NovaStar A8s Pro is a high-end, compact LED receiving card designed for professional LED display cabinets and fine-pitch LED display systems. Supporting resolutions up to 512 × 512 pixels at 60 Hz, it combines high-density board-to-board connectivity with advanced image processing, calibration, and system maintenance features.
Featuring NovaStar Image Booster 2.1, Multi-layer Grayscale Calibration, Thermal Compensation 2.0, HDR, and 22bit+ technology, the A8s Pro is engineered to improve grayscale performance, color consistency, and image uniformity in compatible LED display systems. Its compact 70 × 45 mm design makes it suitable for high-density cabinet integration, rental displays, stage screens, and fixed commercial LED installations.
Package Included
| Version | Package Included |
|---|---|
| A8s Pro – 1-Pack | 1 × NovaStar A8s Pro LED Receiving Card 1 × Individual Blister Packaging |
Package Notice: According to NovaStar's official specifications, each receiving card is individually packaged in a blister pack, with 80 cards per standard master carton. The 1-Pack option contains one receiving card. HUB adapter boards, ribbon cables, power supplies, sending controllers, and other accessories are not included unless separately specified.
Product Notice & Compatibility
Receiving Card Function: The A8s Pro is a receiving card used within a compatible NovaStar synchronous LED display control system. It receives display data from the sending controller and distributes the required signals to LED modules through a matching high-density HUB adapter board.
High-Density Connector Compatibility: The A8s Pro uses high-density board-to-board connectors rather than integrated standard HUB75 ribbon cable outputs. A compatible HUB adapter board is required. Confirm the connector layout, pin definition, mounting arrangement, and module interface before ordering.
Maximum Loading Capacity: A single A8s Pro supports a maximum resolution of 512 × 512 pixels at 60 Hz, equivalent to 262,144 pixels. Actual loading capacity may vary according to the controller, bit depth, refresh rate, firmware, and display configuration.
LED Module Data Groups: Supports up to 40 groups of parallel RGB data, 64 groups of serial data expandable to 128 groups, or 30 groups of 4-LED sub-pixel data. The required configuration depends on the LED module PCB, driver IC, and HUB adapter board design.
Image Booster 2.1: Supports color management, precise grayscale correction, and 22bit+ grayscale enhancement. Actual image enhancement performance depends on the LED driver IC and the compatibility of the complete control system.
HDR Compatibility: Supports HDR10 and HLG for compatible LED display systems. HDR performance requires an appropriate sending controller, compatible content, and correctly configured LED display hardware.
Multi-layer Grayscale Calibration: Supports NovaStar's high-precision calibration workflow to improve low-grayscale uniformity and reduce visible differences between modules and cabinets.
Thermal Compensation 2.0: Supports thermal compensation based on calibration data collected from LED cabinets. This feature is intended to reduce visible brightness and color inconsistencies caused by uneven temperature distribution.
Seam Correction: Supports brightness correction for visible seams between modules or cabinets. Mobile-phone-based seam correction requires compatible NovaStar TU series equipment and supported software.
Low-Latency Operation: Receiving-card latency can be reduced to one frame when used with LED modules equipped with compatible driver ICs containing built-in RAM.
Rotation & Display Adjustment: Supports image rotation in 90-degree increments. Free-angle image rotation requires a compatible SmartLCT and MCTRL R5 configuration.
System Maintenance: Supports receiving-card monitoring, configuration management, firmware backup, mapping, module information management, and applicable redundancy functions. Some advanced functions require dedicated firmware or compatible external hardware.
Replacement Compatibility: The A8s Pro should not be treated as a universal replacement for A8s, A8s-N, A5s Plus, MRV-series, or other receiving cards. Verify the existing HUB adapter board, controller, firmware, cabinet configuration, and calibration data before replacement.
About this item
High-Density Receiving Card for Professional LED Cabinets: Compact 70 × 45 mm receiving card with high-density board-to-board connectors, supporting reliable integration into compatible LED cabinet designs. A matching HUB adapter board is required for LED module connectivity.
Up to 512 × 512 Pixels at 60Hz: Supports a maximum single-card loading capacity of 262,144 pixels, with up to 40 parallel RGB data groups, 64 serial data groups expandable to 128, or 30 groups of 4-LED sub-pixel data for compatible module architectures.
Image Booster 2.1 & 22bit+ Grayscale Enhancement: Supports advanced color management, precise grayscale correction, and 22bit+ technology to improve dark-image details, low-brightness uniformity, and visual consistency when used with compatible driver ICs.
HDR, Calibration & Thermal Compensation: Supports HDR10, HLG, multi-layer grayscale calibration, pixel-level brightness and chroma calibration, and Thermal Compensation 2.0 for demanding fine-pitch LED display applications.
Flexible Image Processing & System Maintenance: Supports 90-degree image rotation, compatible free-angle rotation, low-latency operation, seam correction, mapping, monitoring, firmware backup, and applicable redundancy functions, subject to system compatibility.
Designed for Rental, Stage & Fixed LED Displays: Suitable for professional LED cabinet manufacturers, system integrators, fine-pitch display projects, commercial video walls, exhibition displays, and rental stage LED systems requiring high-density receiving-card integration.
Lead Time & Freight & Delivery
Lead Time
Ships directly from headquarters. Handling time 2–5 business days.
Freight & Delivery
Shipping fees are not included in product pricing and will be charged separately based on the actual freight cost.
Available shipping methods: Standard Shipping / Express Shipping.
Estimated shipping time: Standard delivery takes 9–18 days, while express delivery takes 5–9 days. All models are shipped directly from our headquarters.
For large projects or bulk orders, please contact us to confirm freight solutions, lead time, and delivery arrangements.
Shipping Terms: DDP (Delivered Duty Paid) service may be arranged where available and confirmed. If DDP service is unavailable for the destination, alternative shipping terms such as EXW or FOB will be coordinated separately.
Technical Specifications
| Parameter | A8s Pro |
|---|---|
| Brand | NovaStar |
| Product Type | LED Receiving Card |
| Model | A8s Pro |
| Maximum Resolution | 512 × 512 Pixels @ 60Hz |
| Maximum Pixel Capacity | 262,144 Pixels |
| Communication Interface | High-Density Board-to-Board Connectors |
| Module Connection | Via Compatible HUB Adapter Board |
| Parallel RGB Data Groups | Up to 40 |
| Serial Data Groups | 64, Expandable to 128 |
| 4-LED Sub-Pixel Data Groups | Up to 30 |
| Image Booster | Image Booster 2.1 |
| Grayscale Enhancement | 22bit+ |
| Precise Grayscale | Supported, Driver IC Dependent |
| Color Management | Rec.709 / DCI-P3 / Rec.2020 / Custom Color Gamut |
| HDR | HDR10 / HLG |
| Multi-layer Grayscale Calibration | Supported |
| Thermal Compensation | Thermal Compensation 2.0 |
| Pixel-Level Brightness Calibration | Supported |
| Pixel-Level Chroma Calibration | Supported |
| Seam Correction | Supported |
| Mobile-Phone Seam Correction | Requires Compatible TU Series Products |
| Dark / Bright Line Adjustment | Supported |
| Low Latency | Down to 1 Frame with Compatible RAM-Based Driver ICs |
| 3D Display | Supported with Compatible 3D Controller |
| Individual RGB Gamma | Supported with Compatible Controller and NovaLCT |
| 90° Image Rotation | 0° / 90° / 180° / 270° |
| Free-Angle Image Rotation | Supported with SmartLCT and MCTRL R5 |
| Smart Module Management | Supported with Dedicated Firmware |
| Automatic Module Calibration | Supported with Compatible Flash-Equipped Modules |
| Module Flash Management | Supported |
| Mapping | Supported |
| Configuration Readback | Supported |
| Firmware Program Readback | Supported |
| Firmware Backup | Dual Program Backup |
| Receiving Card Redundancy | Supported with Compatible System Configuration |
| Temperature Monitoring | Supported |
| Voltage Monitoring | Supported |
| Communication Status Monitoring | Supported |
| Input Voltage | DC 3.8–5.5V |
| Recommended Input Voltage | DC 5.0V |
| Rated Current | 0.5A |
| Rated Power Consumption | 2.5W |
| Operating Temperature | –20°C to +70°C |
| Operating Humidity | 10%–90% RH, Non-Condensing |
| Storage Temperature | –25°C to +125°C |
| Storage Humidity | 0%–95% RH, Non-Condensing |
| Dimensions | 70.0 × 45.0 × 8.3 mm |
| PCB Thickness | Not Greater Than 2.0 mm |
| Maximum Total Thickness | Not Greater Than 9.0 mm |
| Net Weight | 17.2 g |
| Standard Individual Packaging | Blister Pack |
| Standard Master Carton Quantity | 80 Receiving Cards |
| Master Carton Dimensions | 378 × 190 × 120 mm |
| Certifications | RoHS / EMC Class B |
Important: The A8s Pro requires a compatible high-density HUB adapter board and a supported NovaStar sending controller. Maximum loading capacity, HDR, Image Booster, low latency, calibration, and redundancy functions depend on the complete system configuration. Confirm the LED module driver IC, HUB board pinout, firmware, and cabinet configuration before ordering.
Usage & Installation Notes
HUB Adapter Board Compatibility: The A8s Pro connects to a compatible HUB adapter board through high-density connectors. It does not provide direct standard HUB75 ribbon cable outputs. Confirm the adapter board's mechanical and electrical compatibility before installation.
Power Supply Requirements: Supply DC 3.8–5.5V, with DC 5.0V recommended. The rated current is 0.5A and rated power consumption is 2.5W. Ensure the HUB board and power distribution system provide a stable, correctly polarized supply.
LED Module Configuration: Confirm the LED module resolution, driver IC, scan mode, data group configuration, and HUB adapter board pinout. Configure the receiving card with the correct module parameters before operation.
Pixel Loading Calculation: A single A8s Pro supports up to 512 × 512 pixels at 60Hz. Calculate the cabinet's total pixel count and verify the actual capacity according to the sending controller, bit depth, refresh rate, and system settings.
Sending Controller Compatibility: Use a compatible NovaStar sending controller and configuration software. Advanced features such as HDR, 3D, free-angle rotation, and low latency require compatible system components and software versions.
Image Booster Configuration: Enable Image Booster 2.1, 22bit+, and precise grayscale functions only after confirming LED driver IC support. Incorrect settings may affect brightness, grayscale, and display performance.
Calibration Data Management: Back up the existing cabinet's brightness and chroma calibration data before replacing a receiving card. Reapply or restore the appropriate coefficients after replacement to maintain image uniformity.
Thermal Compensation: Thermal Compensation 2.0 requires the applicable NovaStar calibration workflow and compatible system hardware. The function should be configured using the actual cabinet's thermal calibration data.
Image Rotation: Standard rotation supports 0°, 90°, 180°, and 270°. Free-angle rotation requires SmartLCT and the compatible MCTRL R5 controller.
Low-Latency Operation: One-frame receiving-end latency requires compatible LED module driver ICs with built-in RAM. Overall system latency also depends on the sending controller, video processing, and display configuration.
Redundancy & Firmware: Configure receiving-card redundancy and backup functions according to the supported system topology. Back up configuration files before firmware updates and use firmware intended for the exact A8s Pro hardware.
Mechanical Installation: The A8s Pro measures 70.0 × 45.0 × 8.3 mm. The recommended spacing between the receiving card and HUB board is approximately 5 mm after the high-density connectors are engaged. Use appropriate mechanical supports and obtain the manufacturer's precision drawings for custom cabinet production.
Environmental Protection: The specified operating temperature range is –20°C to +70°C. Install the receiving card inside a suitable LED cabinet with protection against moisture, condensation, conductive dust, and mechanical damage.
Replacement Verification: When replacing an existing receiving card, confirm the exact model, HUB board, mounting arrangement, receiving-card firmware, configuration file, and calibration data. Do not assume different NovaStar receiving card models are interchangeable.
Application Cases
1. Fine-Pitch Indoor LED Video Walls
The A8s Pro is suitable for high-density indoor LED cabinets used in corporate lobbies, control rooms, exhibition halls, and premium commercial video walls. Its compact design, advanced grayscale processing, and pixel-level calibration support precise image reproduction in compatible fine-pitch LED systems.
2. Rental Stage LED Display Systems
For rental and stage LED cabinets, the A8s Pro supports professional receiving-card integration, high-density connectors, compatible redundancy functions, and advanced image adjustment. These features help system integrators configure and maintain LED screens for concerts, live events, and stage productions.
3. Broadcast & Studio LED Displays
The A8s Pro supports HDR, grayscale enhancement, color management, and calibration functions for compatible broadcast and studio LED display systems. The complete video chain, including sending controller, processing equipment, and LED modules, must support the required image quality settings.
4. Commercial Fixed LED Installations
Suitable for permanent LED installations in shopping centers, hotels, conference venues, and commercial display environments. Its compact PCB, receiving-card monitoring functions, and calibration capabilities support professional cabinet integration and long-term system maintenance.
5. LED Cabinet Manufacturing & System Integration
The A8s Pro can be integrated into custom LED cabinet designs using a compatible high-density HUB adapter board. Its support for multiple RGB data architectures, module management, calibration, and image processing makes it suitable for manufacturers developing professional LED display cabinets.