NovaStar MCTRL 4K LED Sending Box | LED Sending Control & 16 Ethernet Outputs for LED Display Sending Systems
Couldn't load pickup availability
NovaStar MCTRL 4K LED Sending Box
The NovaStar MCTRL 4K is a high-capacity independent LED display sending controller designed for professional 4K LED video walls, large-scale fixed installations, rental displays, and synchronized multi-controller systems.
Featuring DisplayPort 1.2, HDMI 2.0, dual-link DVI inputs, 16 Neutrik Gigabit Ethernet outputs, and four 10G optical ports, the MCTRL 4K supports display loading up to 4096 × 2160 pixels at 60Hz. Advanced functions include HDR10 and HLG processing, Genlock synchronization, low latency, 3D support, pixel-level calibration, and Web-based configuration, subject to the required input modes and compatible receiving cards.
Package Included
| Version | Package Included |
|---|---|
| MCTRL 4K – 1-Pack | 1 × NovaStar MCTRL 4K LED Sending Box |
Product Documentation:
MCTRL 4K Specifications V1.1.0 (PDF)
MCTRL 4K User Manual V1.1.0 (PDF)
MCTRL 4K Firmware V1.2.4.0 (ZIP)
Firmware V1.2.4.0 Update Description
Product Notice & Compatibility
Video Input & Loading Capacity: The MCTRL 4K supports a maximum display loading of 4096 × 2160 pixels at 60Hz. DisplayPort 1.2 and HDMI 2.0 inputs support up to approximately 8.8 million pixels, while the two dual-link DVI inputs support up to approximately 8.3 million pixels in the specified operating modes. Input resolution, video bit depth, and total LED loading must be configured within the controller's supported limits.
Ethernet & Optical Output Configuration: The controller provides 16 Gigabit Ethernet outputs and four 10G optical ports. OPT1 corresponds to Ethernet ports 1–8, while OPT2 corresponds to ports 9–16. OPT3 and OPT4 provide backup channels for OPT1 and OPT2 respectively. These optical ports do not provide four additional independent display-loading channels.
HDR & Receiving Card Compatibility: HDR operation supports HDR10 and HLG standards but requires compatible video sources, receiving cards, and system configuration. According to the V1.1.0 specifications, HDR requires a 10-bit HDMI input and supports A8s and A10s Plus receiving cards. HDR reduces the maximum loading capacity of each Ethernet port by half.
Advanced Function Restrictions: 3D, low latency, Genlock, calibration, and HDR functions have operating restrictions and may not be available simultaneously. Low latency requires HDMI or DP input with vertically loaded cabinets and cannot operate simultaneously with 3D or Genlock. Confirm firmware, receiving card models, and function compatibility before ordering.
About this item
High-Capacity 4K LED Sending Controller: Supports display loading up to 4096 × 2160 pixels at 60Hz, with custom resolutions allowing a maximum width or height of 7680 pixels within the supported loading capacity.
Professional Video Input Connectivity: Features one DisplayPort 1.2 input, one HDMI 2.0 input, and two dual-link DVI inputs, supporting 8-bit, 10-bit, and 12-bit video sources under the specified input resolution and sampling conditions.
16 Ethernet & Four Optical Ports: Provides 16 Neutrik Gigabit Ethernet outputs and four 10G optical ports. Supports Ethernet port redundancy and optical backup configurations for professional LED display signal distribution.
HDR10, HLG & Image Calibration: Supports HDR10 and HLG processing, independent RGB gamma adjustment for applicable 10-bit/12-bit input sources, and NovaStar pixel-level brightness and chroma calibration with compatible receiving cards and calibration systems.
Genlock, Low Latency & 3D: Supports Blackburst Genlock synchronization, low latency below 1ms under specified conditions, and 3D display functionality with compatible EMT200 emitter and 3D glasses. Advanced functions are subject to operating mode restrictions.
Professional System Configuration: Supports Web-based screen configuration, USB and Ethernet computer control, multi-controller cascading, NVIDIA ultra-high-resolution settings, and dual-link DVI mosaic or multi-card modes for professional LED display integration.
Lead Time & Freight & Delivery
Lead Time
Ships directly from headquarters. Handling time 2–5 business days.
Freight & Delivery
Shipping fees are not included in product pricing and will be charged separately based on the actual freight cost.
Available shipping methods: Standard Shipping / Express Shipping.
Estimated shipping time: Standard delivery takes 9–18 days, while express delivery takes 5–9 days. All models are shipped directly from our headquarters.
For large projects or bulk orders, please contact us to confirm freight solutions, lead time, and delivery arrangements.
Shipping Terms: The listed shipping methods are provided under DDP (Delivered Duty Paid) terms. If DDP service is unavailable for the destination, alternative terms such as EXW or FOB will be coordinated separately.
Technical Specifications
| Parameter | MCTRL 4K |
|---|---|
| Brand | NovaStar |
| Product Type | Independent LED Sending Controller / Sending Box |
| Model | MCTRL 4K (MCTRL4K) |
| Maximum Display Loading | 4096 × 2160 pixels @ 60Hz |
| Maximum Custom Width | 7680 pixels |
| Maximum Custom Height | 7680 pixels |
| DisplayPort Input | 1 × DP 1.2 |
| HDMI Input | 1 × HDMI 2.0 |
| DVI Inputs | 2 × Dual-Link DVI |
| DP / HDMI Input Capacity | Up to 8.8 million pixels per input |
| Dual-Link DVI Input Capacity | Up to 8.3 million pixels total |
| Supported Video Bit Depth | 8-bit / 10-bit / 12-bit |
| Maximum HDMI / DP Input Resolution | 4096 × 2160 @ 60Hz under supported video format conditions |
| Maximum DVI Input Resolution | 3840 × 1080 @ 60Hz per input |
| HDMI HDCP | HDCP 1.4 / 2.2 |
| DP HDCP | HDCP 1.3 |
| Ethernet Outputs | 16 × Neutrik Gigabit Ethernet |
| Maximum Loading per Ethernet Port (8-bit) | 650,000 pixels |
| Maximum Loading per Ethernet Port (10/12-bit) | 320,000 pixels |
| Ethernet Port Redundancy | Supported |
| Optical Ports | 4 × 10G optical ports |
| Optical Port Assignment | OPT1: Ethernet 1–8 OPT2: Ethernet 9–16 OPT3: Backup of OPT1 OPT4: Backup of OPT2 |
| Single-Mode Optical Transmission | 1310 nm / up to 10 km / LC connector |
| Multimode Optical Transmission | 850 nm / up to 300 m / LC connector |
| HDR | HDR10 / HLG |
| Individual RGB Gamma Adjustment | Supported with applicable 10-bit / 12-bit input |
| 3D Function | Supported with EMT200 emitter and 3D glasses |
| Low Latency | Below 1ms when image start position is 0, subject to operating restrictions |
| Genlock | Blackburst Genlock IN / LOOP |
| Maximum Genlock Cascade | 10 MCTRL4K units |
| Dual-Link DVI Modes | Mosaic / Multi-Card |
| Pixel-Level Calibration | Supported |
| Web Configuration | Supported |
| Ethernet Computer Control | Supported |
| USB Control | USB IN / USB OUT |
| Power Input | AC 100–240V, 50/60Hz |
| Rated Power Consumption | 30W |
| Operating Temperature | –20°C to +60°C |
| Operating Humidity | 10–90% RH, non-condensing |
| Dimensions | 482.6 × 372.0 × 96.0 mm |
| Net Weight | 4.6 kg |
| Certifications | FCC, EMC, LVD, RoHS, UL & CUL, EAC, CB, IC, KC, RCM |
Ethernet Output Loading Capacity
| Video Source | Maximum Loading per Ethernet Port |
|---|---|
| 8-bit Input | 650,000 pixels |
| 10-bit / 12-bit Input | 320,000 pixels |
Important: The values above represent per-port maximum loading capacities. The total LED display loading must also remain within the controller's supported input capacity and system configuration limits. HDR and 3D operation further reduce the maximum loading capacity of each Ethernet port by half.
Usage & Installation Notes
Power Connection: Connect the MCTRL 4K to an AC 100–240V, 50/60Hz power source. Verify electrical grounding, power cable compatibility, and local electrical requirements before operation.
Video Source Configuration: Connect a compatible DP 1.2, HDMI 2.0, or dual-link DVI video source. Verify input resolution, refresh rate, video bit depth, and sampling format. Configure 10-bit/12-bit input settings correctly in NovaLCT when applicable.
Ethernet Output Distribution: Connect the 16 Gigabit Ethernet outputs to compatible LED receiving cards. Verify the loading of each output, cabinet wiring arrangement, receiving card mapping, and total display resolution before operation.
Optical Signal Connection: Use compatible 10G optical modules and fiber cables. OPT1 and OPT2 correspond to the two groups of Ethernet outputs, while OPT3 and OPT4 provide backup channels. Verify the required fiber type, wavelength, connector, and transmission distance.
HDR & 3D Configuration: HDR requires supported 10-bit HDMI input and compatible receiving cards. The 3D function requires compatible EMT200 equipment and 3D glasses. Both functions reduce the maximum loading capacity per Ethernet output and must be configured according to the official function restrictions.
Low-Latency & Genlock: Low latency requires HDMI or DP input and vertical cabinet loading. It cannot operate simultaneously with 3D or Genlock. For synchronized multi-controller systems, use compatible Blackburst Genlock connections and verify signal timing.
Computer Control & Cascading: Use the Ethernet control interface or USB IN for computer communication and configuration. USB OUT supports compatible device cascading. The front-panel Type-A USB port is intended for USB drives and must not be connected directly to a control computer.
Installation & Maintenance: Install the controller securely in a suitable equipment rack or operating environment with adequate ventilation. Keep the device away from moisture, excessive heat, and conductive materials. Disconnect power before servicing or changing signal connections.
Application Cases
1. Large-Scale 4K LED Video Wall System
The MCTRL 4K can serve as the sending controller for a professional 4K LED video wall. A compatible DP 1.2 or HDMI 2.0 source supplies the video signal, while the controller distributes display data through its 16 Gigabit Ethernet outputs to compatible receiving cards installed in the LED cabinets. The screen configuration must remain within the controller's supported loading capacity.
2. Concert & Rental LED Stage Display
For concert stages, live events, and rental LED displays, the MCTRL 4K supports high-resolution video input, Ethernet signal distribution, and optical transmission. System integrators can configure the controller for compatible LED cabinet arrangements and use Genlock synchronization when multiple controllers must operate with coordinated timing.
3. Long-Distance Fiber-Based LED Display System
The MCTRL 4K can be used in LED display installations where optical signal transmission is required between the control equipment and the LED display system. OPT1 and OPT2 provide optical transmission corresponding to the two groups of Ethernet outputs, while OPT3 and OPT4 provide backup channels. Suitable optical modules and fiber cables must be selected according to the transmission requirements.
4. Professional Multi-Controller LED Display Integration
For large LED installations requiring multiple synchronized controllers, MCTRL 4K units can be cascaded and synchronized through compatible Genlock connections. Web-based configuration, receiving card mapping, and pixel-level calibration support system commissioning and maintenance. Video source compatibility, controller firmware, receiving card models, and loading requirements should be verified before deployment.