NovaStar MCTRL600 LED Sending Box | LED Sending Control & 4 Ethernet Outputs for LED Display Sending Systems

In stock
SKU: PLM-PKZQ01-SND-NW-MCTRL600-1P
Regular price $409.99
Model
Package Qty

NovaStar MCTRL600 LED Sending Box

The NovaStar MCTRL600 is an independent LED display sending controller designed to receive HDMI or DVI video signals and transmit processed display data to compatible LED receiving cards through four Gigabit Ethernet outputs.
With a nominal LED loading capacity of approximately 2.3 million pixels, USB computer control, UART device cascading, Ethernet port redundancy, and pixel-level brightness and chroma calibration support, the MCTRL600 is suitable for professional LED display systems requiring multiple data outputs and flexible video source connections.

Package Included

Version Package Included
MCTRL600 – 1-Pack 1 × NovaStar MCTRL600 LED Sending Box

Product Documentation:
MCTRL600 LED Display Controller Specifications V2.3.1 (PDF)
MCTRL600 Firmware V4.8.0.0
Firmware V4.8.0.0 Release Notes

Product Notice & Compatibility

Controller Type: The MCTRL600 is an independent LED sending controller with an integrated AC power input, HDMI/DVI video inputs, and four Gigabit Ethernet outputs. It is different from the MSD600 sending card board and should not be treated as an interchangeable hardware form factor.

Video Input & LED Loading: The MCTRL600 supports HDMI/DVI video input up to 1920 × 1200 @ 60Hz with 8-bit video sources. For 10-bit or 12-bit sources, the maximum specified input resolution is 1440 × 900 @ 60Hz. Each Ethernet output supports up to 650,000 pixels. The supported video input resolution and actual LED screen loading capacity are different specifications.

Receiving Card Compatibility: Before purchasing, verify compatibility with the existing NovaStar receiving cards, firmware, configuration software, and LED module parameters. Compatibility with every receiving card generation or third-party control system is not guaranteed.

System Configuration: For new installations, controller replacement, or LED display expansion, confirm the video source, required pixel count, Ethernet output arrangement, receiving card model, and system configuration files before ordering.

About this item

  • Independent LED Sending Controller: Receives HDMI or DVI video signals and transmits LED display data through four Gigabit Ethernet outputs to compatible receiving cards installed in LED display cabinets.

  • Four Ethernet Data Outputs: Provides four RJ45 Gigabit Ethernet ports, each supporting up to 650,000 pixels, with Ethernet port redundancy available for compatible LED display system configurations.

  • HDMI & DVI Video Input: Features one HDMI 1.3 input and one Single-Link DVI input. Supports 8-bit video sources up to 1920 × 1200 @ 60Hz and 10-bit/12-bit sources up to 1440 × 900 @ 60Hz under the specified input conditions.

  • USB Control & UART Cascading: Includes one Type-B USB port for computer communication and two UART control ports for cascading compatible MCTRL600 devices, supporting up to 20 devices in a cascade.

  • Brightness Calibration & Monitoring: Supports pixel-level brightness and chroma calibration with compatible NovaStar calibration software and equipment. A dedicated light sensor connector enables ambient brightness monitoring and automatic screen brightness adjustment with a compatible sensor.

  • Professional LED Display Integration: Features AC 100–240V power input, a rack-width enclosure, and multiple Ethernet outputs for fixed LED displays, rental screens, exhibition systems, commercial LED advertising, and professional LED display control installations.

Lead Time & Freight & Delivery

Lead Time
Ships directly from headquarters. Handling time 2–5 business days.

Freight & Delivery
Shipping fees are not included in product pricing and will be charged separately based on the actual freight cost.

Available shipping methods: Standard Shipping / Express Shipping.

Estimated shipping time: Standard delivery takes 9–18 days, while express delivery takes 5–9 days. All models are shipped directly from our headquarters.

For large projects or bulk orders, please contact us to confirm freight solutions, lead time, and delivery arrangements.

Shipping Terms: The listed shipping methods are provided under DDP (Delivered Duty Paid) terms. If DDP service is unavailable for the destination, alternative terms such as EXW or FOB will be coordinated separately.

Technical Specifications

Parameter MCTRL600
Brand NovaStar
Product Type Independent LED Sending Controller / Sending Box
Model MCTRL600
Maximum LED Loading Approximately 2.3 million pixels (nominal)
Ethernet Outputs 4 × Gigabit Ethernet (RJ45)
Maximum Loading per Ethernet Port 650,000 pixels
Ethernet Port Redundancy Supported
HDMI Input 1 × HDMI 1.3
DVI Input 1 × Single-Link DVI
Audio Input 1 × Audio Input
8-bit Video Input Resolution Up to 1920 × 1200 @ 60Hz
10-bit / 12-bit Video Input Resolution Up to 1440 × 900 @ 60Hz
HDMI HDCP Compliance HDCP 1.4
Custom Input Resolution Supported
Custom Resolution Maximum Width 3840 pixels
Custom Resolution Maximum Height 3840 pixels
Interlaced Video Input Not supported
Computer Control 1 × Type-B USB 2.0
Device Cascading UART IN / OUT
Maximum Cascaded Devices 20
Light Sensor Connector 1 × Light Sensor Interface
Automatic Brightness Adjustment Supported with compatible light sensor
Pixel-Level Brightness Calibration Supported with compatible calibration system
Pixel-Level Chroma Calibration Supported with compatible calibration system
Power Input AC 100–240V, 50/60Hz
Rated Power Consumption 6.6W
Operating Temperature –20°C to +60°C
Operating Humidity 10–90% RH, non-condensing
Dimensions 482.0 × 268.5 × 44.4 mm
Net Weight 2.5 kg
Installation Orientation Horizontal placement only
Certifications FCC, CE, RoHS, EAC, IC, PFOS

Important: Each Ethernet output supports up to 650,000 pixels, but the actual total LED loading must also comply with the controller's video processing limits, input resolution, output arrangement, and system configuration. The four Ethernet port capacities should not be treated as an unconditional guarantee of 2.6 million independently addressable pixels.

Usage & Installation Notes

  • Power Connection: Connect the MCTRL600 to an AC 100–240V, 50/60Hz power source. Verify the power cable, grounding, and local electrical requirements before operation.

  • HDMI & DVI Video Connection: Connect a compatible video source to the HDMI 1.3 or Single-Link DVI input. Verify the video bit depth, resolution, refresh rate, and supported input format. Interlaced video input is not supported.

  • Ethernet Signal Connection: Connect the four Gigabit Ethernet outputs to compatible LED receiving cards. Ensure that each output does not exceed 650,000 pixels and that the complete LED display loading remains within the supported controller configuration.

  • Computer Control & Cascading: Use the Type-B USB port for PC communication and compatible NovaStar configuration software. UART IN/OUT ports support device cascading, with up to 20 compatible devices in a cascade.

  • Redundancy & Calibration: Configure Ethernet port redundancy according to the display system architecture. Pixel-level brightness and chroma calibration requires compatible NovaStar software and calibration equipment. Test backup functions before deploying the system.

  • Light Sensor Integration: Connect a compatible light sensor when automatic brightness adjustment is required. Verify sensor compatibility and configure brightness adjustment through the supported NovaStar control system.

  • Installation & Maintenance: Place the controller horizontally on a stable surface or suitable rack shelf. Do not install it vertically or upside down. Maintain adequate ventilation, avoid moisture and excessive heat, and disconnect power before servicing or changing equipment connections.

Application Cases

1. Indoor Fixed LED Video Wall System

The MCTRL600 can operate as the sending controller for compatible indoor LED video walls. A computer or video processor supplies an HDMI or DVI signal to the controller, which distributes display data through its Ethernet outputs to NovaStar receiving cards installed inside the LED cabinets. The final screen resolution must remain within the supported controller loading capacity.

2. Commercial LED Advertising Display

For commercial LED advertising installations, the MCTRL600 can connect an HDMI or DVI video source to a compatible receiving card network. Its four Ethernet outputs support signal distribution across multiple LED display cabinets, while optional light sensor integration can provide automatic brightness adjustment when properly configured.

3. Rental Stage & Exhibition LED Displays

The MCTRL600 can be integrated into rental LED display systems used for concerts, exhibitions, conferences, and live events. Multiple Ethernet outputs, USB control, and UART cascading support the configuration of compatible multi-cabinet LED display installations.

4. LED Display Control System Replacement & Expansion

The MCTRL600 can be considered for replacing or expanding compatible NovaStar LED display sending systems. Before installation, technicians should verify the existing controller model, receiving card compatibility, HDMI/DVI video requirements, Ethernet port assignments, firmware, and LED display configuration files.