NovaStar MCTRL660 PRO LED Sending Box | LED Sending Control & 4 Ethernet Outputs for LED Display Sending Systems
Couldn't load pickup availability
NovaStar MCTRL660 PRO LED Sending Box
The NovaStar MCTRL660 PRO is a professional independent LED display controller designed to receive HDMI, DVI, or 3G-SDI video signals and transmit processed display data to compatible LED receiving cards through six Gigabit Ethernet outputs or 10G optical connections.
With a maximum loading capacity of 1920 × 1200 pixels at 60Hz, Genlock synchronization, low-latency processing, image mirroring, Web control, and dual operating modes, the MCTRL660 PRO supports professional fixed LED displays, rental screens, stage productions, and multi-controller LED display systems.
Package Included
| Version | Package Included |
|---|---|
| MCTRL660 PRO – 1-Pack | 1 × NovaStar MCTRL660 PRO LED Sending Box 1 × Power Cable 1 × User Manual |
Product Documentation:
MCTRL660 PRO Specifications V1.3.0 (PDF)
MCTRL660 PRO User Manual V1.3.0 (PDF)
MCTRL660 PRO Quick Start Guide V1.3.0 (PDF)
MCTRL660 PRO Firmware V1.0.4.0 (ZIP)
Product Notice & Compatibility
Controller Interface Notice: The MCTRL660 PRO provides six Gigabit Ethernet outputs and two 10G optical ports. The optical ports can be used for optical signal transmission or conversion according to the selected operating mode. The optical and Ethernet ports should not be treated as eight independent display-loading channels.
Video Input & Loading Notice: The controller supports a maximum loading capacity of 1920 × 1200 pixels at 60Hz. HDMI 1.4a and Single-Link DVI support 8-bit input up to 1920 × 1200 @ 60Hz, while 10-bit and 12-bit input is limited to 1920 × 1080 @ 60Hz. The maximum 3G-SDI input resolution is 1920 × 1080 @ 60Hz.
Ethernet Loading & Redundancy: Each Gigabit Ethernet output supports up to 650,000 pixels with 8-bit input or 320,000 pixels with 10-bit/12-bit input. Actual system loading must also remain within the controller's overall loading capacity. Ethernet port redundancy requires appropriate configuration and does not increase independent display-loading capacity.
System Compatibility: Before purchasing, verify the receiving card model, firmware, video source format, controller configuration, Ethernet output loading, and optical transmission requirements. Genlock, low latency, image mirroring, and optical conversion functions must be configured according to the complete LED display system.
About this item
Multiple Professional Video Inputs: Features HDMI 1.4a, Single-Link DVI, and 3G-SDI inputs, supporting 8-bit, 10-bit, and 12-bit video sources under specified resolution and color format conditions.
Six Ethernet & Dual Optical Ports: Provides six Gigabit Ethernet outputs and two 10G optical ports. Supports sending controller mode and fiber converter mode for compatible LED display signal distribution systems.
High-Resolution LED Display Loading: Supports a maximum controller loading capacity of 1920 × 1200 pixels at 60Hz, with custom resolution configurations supporting widths up to 3840 pixels and heights up to 2560 pixels, subject to overall loading limits.
Genlock & Low-Latency Processing: Supports Blackburst Genlock synchronization for compatible multi-controller systems and low-latency processing below 1ms when the image start position is set to zero.
Advanced Image & System Control: Supports image mirroring, independent RGB gamma adjustment under applicable video source conditions, pixel-level brightness and chroma calibration, automatic screen configuration, input monitoring, and one-click configuration backup and recovery.
Professional Control & Cascading: Supports Web control, TCP/IP communication, USB device cascading, and Genlock cascading of up to eight compatible MCTRL660 PRO units for professional rental, fixed-installation, and synchronized LED display systems.
Lead Time & Freight & Delivery
Lead Time
Ships directly from headquarters. Handling time 2–5 business days.
Freight & Delivery
Shipping fees are not included in product pricing and will be charged separately based on the actual freight cost.
Available shipping methods: Standard Shipping / Express Shipping.
Estimated shipping time: Standard delivery takes 9–18 days, while express delivery takes 5–9 days. All models are shipped directly from our headquarters.
For large projects or bulk orders, please contact us to confirm freight solutions, lead time, and delivery arrangements.
Shipping Terms: The listed shipping methods are provided under DDP (Delivered Duty Paid) terms. If DDP service is unavailable for the destination, alternative terms such as EXW or FOB will be coordinated separately.
Technical Specifications
| Parameter | MCTRL660 PRO |
|---|---|
| Brand | NovaStar |
| Product Type | Independent LED Sending Controller / Sending Box |
| Model | MCTRL660 PRO |
| Maximum Loading Capacity | 1920 × 1200 pixels @ 60Hz |
| Custom Resolution | Maximum width: 3840 pixels Maximum height: 2560 pixels |
| HDMI Input | 1 × HDMI 1.4a |
| DVI Input | 1 × Single-Link DVI |
| SDI Input | 1 × 3G-SDI |
| HDMI / DVI 8-bit Input | Up to 1920 × 1200 @ 60Hz |
| HDMI / DVI 10-bit / 12-bit Input | Up to 1920 × 1080 @ 60Hz |
| 3G-SDI Input Resolution | Up to 1920 × 1080 @ 60Hz |
| HDMI Color Formats | RGB 4:4:4 / YCbCr 4:4:4 / 4:2:2 / 4:2:0 |
| HDCP | HDCP 1.4 (HDMI input) |
| Ethernet Outputs | 6 × Gigabit Ethernet (RJ45) |
| Maximum Loading per Ethernet Port (8-bit) | 650,000 pixels |
| Maximum Loading per Ethernet Port (10/12-bit) | 320,000 pixels |
| Optical Ports | 2 × 10G optical ports (OPT1 / OPT2) |
| Single-Mode Optical Transmission | 1310 nm / up to 10 km / LC connector |
| Multimode Optical Transmission | 850 nm / up to 300 m / LC connector |
| Operating Modes | Sending Controller / Fiber Converter |
| Ethernet Port Redundancy | Supported |
| Optical Backup | OPT2 supports backup of OPT1 |
| Video Loop Outputs | HDMI LOOP / DVI LOOP / 3G-SDI LOOP |
| Monitor Output | HDMI, 1920 × 1080 @ 60Hz |
| Genlock Input | Blackburst Genlock |
| Genlock Loop | Supported |
| Low Latency | Below 1ms when image start position is 0 |
| Image Mirroring | Supported |
| Individual RGB Gamma Adjustment | Supported under applicable video source conditions |
| Pixel-Level Calibration | Brightness & Chroma |
| Automatic Screen Configuration | Supported |
| Input Monitoring | Supported |
| Configuration Backup & Restore | Supported |
| Web Control | Supported |
| Network Control | TCP/IP via Ethernet control port |
| USB Control | USB IN / USB OUT |
| Maximum Cascaded Controllers | 8 compatible MCTRL660 PRO units |
| Power Input | AC 100–240V |
| Rated Power Consumption | 20W |
| Operating Temperature | –20°C to +60°C |
| Operating Humidity | 10–90% RH, non-condensing |
| Dimensions | 482.6 × 356.0 × 50.1 mm |
| Net Weight | 4.6 kg |
| Space Requirement | 1U |
| Certifications | RoHS, EMC, FCC, IC, LVD |
Ethernet Output Loading Capacity
| Video Source | Maximum Loading per Ethernet Port |
|---|---|
| 8-bit | 650,000 pixels |
| 10-bit / 12-bit | 320,000 pixels |
Important: These are per-port maximum loading capacities. The complete LED display configuration must also remain within the controller's overall loading limit of 1920 × 1200 pixels at 60Hz. Ethernet redundancy and optical backup configurations do not increase the maximum independently addressable display area.
Usage & Installation Notes
Power Connection: Connect the MCTRL660 PRO to a suitable AC 100–240V power source. Verify the power cable, grounding, and local electrical requirements before operation.
Video Source Connection: Connect compatible HDMI 1.4a, Single-Link DVI, or 3G-SDI sources. Verify video resolution, refresh rate, color depth, and signal format. Use the corresponding loop output when compatible video signal distribution is required.
Ethernet Output Connection: Connect the six Gigabit Ethernet outputs to compatible NovaStar receiving cards. Verify output port assignments, receiving card mapping, and the maximum pixel loading for the selected video source bit depth.
Optical Transmission: Use compatible optical modules and fiber cables according to the specified wavelength, connector type, transmission distance, and operating mode. Configure OPT1 and OPT2 according to the primary and backup optical signal requirements.
Genlock Synchronization: Connect a compatible Blackburst synchronization source to GENLOCK IN when external synchronization is required. Use GENLOCK LOOP for compatible multi-controller arrangements and verify synchronization before operation.
Control & Cascading: Use the Ethernet control port for TCP/IP and Web control. USB IN/OUT can be used for compatible device cascading. Up to eight MCTRL660 PRO units can be cascaded according to the supported system arrangement.
Low-Latency & Image Processing: Configure low latency, image mirroring, RGB gamma adjustment, and calibration according to the video source and receiving card requirements. The specified below-1ms latency applies when the image start position is zero.
Installation & Maintenance: Install the controller securely in a suitable equipment environment with adequate ventilation. Keep the device away from moisture, excessive heat, and conductive materials. Disconnect power before servicing or changing equipment connections.
Application Cases
1. Professional Rental LED Stage Display
The MCTRL660 PRO can operate as the sending controller in a compatible rental LED stage display system. HDMI, DVI, or 3G-SDI video signals are received by the controller and transmitted through its Gigabit Ethernet outputs to LED receiving cards installed inside the display cabinets. Image mirroring, input monitoring, and configuration backup functions support professional stage system setup and maintenance.
2. Multi-Controller Synchronized LED Display
For compatible large LED display projects requiring multiple controllers, the MCTRL660 PRO supports Blackburst Genlock synchronization and cascading of up to eight units. System integrators can coordinate video signal timing across multiple controller units while maintaining the required receiving card mapping and output loading configuration.
3. Long-Distance Optical LED Signal Transmission
The MCTRL660 PRO can be configured for optical signal transmission between control equipment and compatible LED display receiving systems. Its 10G optical ports support sending controller and fiber converter operating modes, allowing system integrators to design fiber-based transmission links according to the specified optical module and fiber cable requirements.
4. Fixed LED Display & Control System Integration
The MCTRL660 PRO can be integrated into fixed LED display systems for commercial installations, exhibition venues, sports facilities, and monitoring centers. Its multiple video inputs, Ethernet outputs, Web control, and backup functions support professional LED display signal distribution and system management. Controller, receiving card, firmware, and optical interface compatibility should be verified before installation.