NovaStar MRV412-N LED Receiving Card | LED Data Receiving & 12 HUB75 Outputs for LED Display Modules
Couldn't load pickup availability
NovaStar MRV412-N LED Receiving Card
The NovaStar MRV412-N is a professional LED display receiving card designed to receive display data from compatible NovaStar sending controllers and distribute signals to LED display modules through 12 standard HUB75E connectors.
Supporting up to 24 groups of parallel RGB data, the MRV412-N provides advanced image processing, pixel-level calibration, signal redundancy, and system monitoring functions. It is suitable for professional LED cabinet integration, fixed installations, rental display systems, and maintenance of compatible NovaStar-controlled LED displays.
Package Included
| Version | Package Included |
|---|---|
| MRV412-N – 1-Pack | 1 × NovaStar MRV412-N LED Receiving Card |
Product Documentation: MRV412-N Receiving Card Specifications V1.0.2 (PDF)
Product Notice & Compatibility
Discontinuation & Replacement Notice: The NovaStar MRV412-N was discontinued on October 30, 2026, and has been replaced by the MRV412-S.
Important Compatibility Notice: The MRV412-N and MRV412-S cannot be mixed within the same LED display system.
Before ordering, please verify your existing receiving card model, firmware version, controller compatibility, and LED module configuration. For replacement orders or system expansion, please contact us to confirm the appropriate model and compatibility requirements. Availability of discontinued MRV412-N units is subject to remaining stock.
About this item
-
12 HUB75E Module Connectors: Equipped with 12 standard HUB75E connectors, supporting up to 24 groups of parallel RGB data for signal distribution to compatible LED display modules.
-
High Loading Capacity: Supports up to 512 × 512 pixels at 60Hz with PWM driver ICs and 8-bit video sources, or 512 × 384 pixels at 60Hz with common driver ICs and 8-bit video sources. Actual capacity depends on the driver IC and system configuration.
-
Advanced Image Processing: Supports Color Management, 18bit+, pixel-level brightness and chroma calibration, independent RGB gamma adjustment, low latency, and image rotation in 90-degree increments, subject to applicable function requirements.
-
Signal Backup & Reliability: Supports loop backup and firmware program backup functions for compatible LED display control systems, helping improve signal-path reliability and system maintenance efficiency.
-
System Monitoring & Diagnostics: Supports receiving card temperature and voltage monitoring, network communication quality detection, mapping, preset image functions, and firmware or configuration parameter readback for system troubleshooting.
-
Professional System Integration: Designed for compatible NovaStar LED display control systems, with Gigabit Ethernet communication and HUB75E module connectivity. Verify the receiving card model, firmware, module wiring, and controller configuration before installation or replacement.
Lead Time & Freight & Delivery
Lead Time
Ships directly from headquarters. Handling time 2–5 business days.
Freight & Delivery
Shipping fees are not included in product pricing and will be charged separately based on the actual freight cost.
Available shipping methods: Standard Shipping / Express Shipping.
Estimated shipping time: Standard delivery takes 9–18 days, while express delivery takes 5–9 days. All models are shipped directly from our headquarters.
For large projects or bulk orders, please contact us to confirm freight solutions, lead time, and delivery arrangements.
Shipping Terms: The listed shipping methods are provided under DDP (Delivered Duty Paid) terms. If DDP service is unavailable for the destination, alternative terms such as EXW or FOB will be coordinated separately.
Technical Specifications
| Parameter | MRV412-N |
|---|---|
| Brand | NovaStar |
| Product Type | LED Receiving Card |
| Model | MRV412-N |
| Module Connectors | 12 × HUB75E |
| Parallel RGB Data | Up to 24 groups |
| Ethernet Communication | Gigabit Ethernet |
| Maximum Scanning | Up to 1/64 scan, subject to module configuration |
| Power Input | DC 3.8–5.5V |
| Rated Current | 0.5A |
| Rated Power Consumption | 2.5W |
| Color Management | Supported |
| 18bit+ | Supported |
| Pixel-Level Calibration | Brightness & Chroma |
| Individual RGB Gamma Adjustment | Supported |
| Low Latency | Supported |
| Image Rotation | 90-degree increments |
| 3D Function | Supported with compatible 3D control equipment |
| Quick Adjustment of Dark or Bright Lines | Supported |
| Multi-batch Adjustment | Supported |
| Preset Picture | Supported |
| Mapping | Supported |
| Loop Backup | Supported |
| Firmware Program Backup | Supported |
| Firmware & Configuration Readback | Supported |
| Temperature & Voltage Monitoring | Supported |
| Network Communication Monitoring | Supported |
| Operating Temperature | –20°C to +70°C |
| Operating Humidity | 10–90% RH, non-condensing |
| Dimensions | 145.6 × 91.5 × 19.3 mm |
| Net Weight | 96.0 g |
| Certifications | RoHS, EMC Class A |
Maximum Loading Capacity (8-bit Video Source)
| Driver IC Type | Maximum Resolution |
|---|---|
| PWM Driver IC | 512 × 512 @ 60Hz |
| Common Driver IC | 512 × 384 @ 60Hz |
Important: Maximum loading capacity depends on the LED module driver IC, scanning configuration, video source, controller, and system settings. The listed values apply to 8-bit video sources and should not be treated as universal loading limits for every LED module.
Usage & Installation Notes
-
Power Connection: Supply DC 3.8–5.5V through the designated power connector. Verify the voltage and polarity before powering on the receiving card.
-
Ethernet Signal Connection: Connect the MRV412-N to a compatible NovaStar sending controller using the appropriate Ethernet connection. Verify the receiving card sequence, signal routing, and controller loading requirements.
-
HUB75E Module Connection: Connect compatible LED modules through the 12 HUB75E connectors. Confirm the module interface definition, ribbon cable orientation, data group mapping, and scanning configuration before operation.
-
Software & Firmware Configuration: Use compatible NovaStar configuration software and the correct receiving card configuration file. Confirm firmware compatibility with the installed LED module driver IC before performing firmware updates.
-
Backup & Monitoring: Configure signal redundancy, mapping, preset picture, and monitoring functions according to the capabilities of the complete control system. Test the configured functions before commissioning.
-
Handling & Maintenance: Disconnect power before installing or removing the receiving card. Use antistatic protection, avoid moisture and excessive heat, maintain suitable cabinet ventilation, and operate within the specified environmental limits.
Application Cases
1. Indoor LED Video Wall Integration
The MRV412-N can be integrated into compatible NovaStar-controlled indoor LED video walls to receive display data and distribute RGB signals through its 12 HUB75E connectors. Its image processing and pixel-level calibration functions support modular LED display systems requiring consistent brightness, chroma, and image output.
2. Outdoor LED Display Cabinet Integration
For properly protected outdoor LED cabinets, the MRV412-N can operate as the receiving card within a compatible NovaStar control system. Its monitoring and redundancy functions can support fixed-installation LED display projects requiring signal diagnostics and reliable cabinet-level data distribution.
3. Rental & Event LED Display Systems
The MRV412-N can be used in compatible rental LED display cabinets for exhibitions, conferences, and indoor event screens. Its mapping, preset picture, and image adjustment functions can assist technicians with cabinet identification, system configuration, and display setup.
4. Existing LED Display System Maintenance
The MRV412-N is suitable for replacement and spare-parts planning in existing compatible LED display systems. Technicians should verify the receiving card model, firmware, HUB75E wiring, and module configuration before replacement. The MRV412-N and MRV412-S must not be mixed within the same LED display system.